Hardware & MechanicalCompression Springs - 316 Stainless Steel Closed and Ground Ends

Compression Springs - 316 Stainless Steel Closed and Ground Ends

6 parts listed - every one sourced through qualified suppliers, 100% authentic, fully traceable.

Part numberNameKey specsDocs
CS-316-1-0.18-0.1441" Lg x 0.18" OD x 0.144" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.144"
OD 0.18"
Wire Dia. 0.018"
Material 316 Stainless Steel
Compressed Lg 0.26"
End Type Closed and Ground
Max. Load 1.9 lb
Spring Rate 2.6 lb/in
 Drawing Spec SheetRequest quote
CS-316-1-0.24-0.1881" Lg x 0.24" OD x 0.188" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.188"
OD 0.24"
Wire Dia. 0.026"
Material 316 Stainless Steel
Compressed Lg 0.23"
End Type Closed and Ground
Max. Load 4.5 lb
Spring Rate 5.9 lb/in
 Drawing Spec SheetRequest quote
CS-316-1-0.36-0.2781" Lg x 0.36" OD x 0.278" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.278"
OD 0.36"
Wire Dia. 0.041"
Material 316 Stainless Steel
Compressed Lg 0.23"
End Type Closed and Ground
Max. Load 9 lb
Spring Rate 7.3 lb/in
 Drawing Spec SheetRequest quote
CS-316-1-0.48-0.391" Lg x 0.48" OD x 0.39" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.39"
OD 0.48"
Wire Dia. 0.045"
Material 316 Stainless Steel
Compressed Lg 0.48"
End Type Closed and Ground
Max. Load 8.9 lb
Spring Rate 17 lb/in
 Drawing Spec SheetRequest quote
CS-316-1-0.48-0.4041" Lg x 0.48" OD x 0.404" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.404"
OD 0.48"
Wire Dia. 0.038"
Material 316 Stainless Steel
Compressed Lg 0.05"
End Type Closed and Ground
Max. Load 6 lb
Spring Rate 6 lb/in
 Drawing Spec SheetRequest quote
CS-316-1-0.6-0.511" Lg x 0.6" OD x 0.51" ID 316 Stainless Steel Compression Spring, Closed and Ground Ends
Length 1"
ID 0.51"
OD 0.6"
Wire Dia. 0.045"
Material 316 Stainless Steel
Compressed Lg 0.246"
End Type Closed and Ground
Max. Load 7.4 lb
Spring Rate 9.9 lb/in
 Drawing Spec SheetRequest quote

Don't see the exact part?

We source far more than we list - send us a part number or your whole BOM and we'll quote it within 24 hours.

Request a quoteAll hardware & mechanical